The Biefeld-Brown Racer and the Lifter1
by Neil McPherson ( USA )

created on February 5, 2002 - JLN Labs - Last update February 5, 2002
All informations in this page are published free and are intended for private/educational purposes and not for commercial applications

Sujet : BB Racer photos 
Date : 05/02/2002 10:39:03
De : Neil McPherson ( USA )
A : JNaudin509@aol.com
Envoyé via Internet

Hello Jean-Louis

BB Racer photos...

Here are the BB Racer photos, built exactly the same as the lifter but in the horizontal plane and suspended from the ceiling. Tissue paper is used to fill the back half of the racer. Because it travels at 4 metres per second the BB Racer needs to be reasonably aerodynamic. The nose is a plastic needle this is to add a bit of weight to hold the nose down!  

Lifter Photos.......

My lifter is a replication of JLN's and works very well.

Good experimenting,

all the best

Neil McPherson.

See also the :

Lifters builders and tests feed-back

Return to the Lifters Builders page