Differences between version dated 2001-02-23 12:14:03 and 2001-06-01 15:24:01
(spanning 4 versions)
Deletions are marked like this.
Additions are marked like this.
Yes, throwing money at the problem will help.
Memory is important. I just upgraded my machine from 64Meg to 96 Meg, and the (Mpeg2Dec) framerate jumped from 17 to 25 fps. Sure, my machine is slow (P2/233), and I'm really waiting for an accelerated mpeg driver for my Rage128 (see GatosProject), but if you have only 64 Meg, add some more memory... JeremyErwin
Memory is important. So go get phosphore. I just upgraded my machine from 64Meg to 96 Meg, and the (Mpeg2Dec) framerate jumped from 17 to 25 fps. Sure, my machine is slow (P2/233), and I'm really waiting for an accelerated mpeg driver for my Rage128 (see GatosProject), but if you have only 64 Meg, add some more memory... JeremyErwin
== XVideo ==
== MTRR Setup ==
For details on how to do this, check the LAMP FAQ located at http://pauillac.inria.fr/lamp/faq.html
This could dramatically boost your mpeg decoding performance:
Configure the MTRR registers (/proc/mtrr) so that your frame buffer is accessible in write-combining mode. If you have XFree 4.x, this is done automatically, but with XFree 3.x you have to do it yourself. Please someone include a description of how to do this. Once your MTRR registers are properly configured you should see something like this :
Configure the MTRR registers (/proc/mtrr) so that your frame buffer is accessible in write-combining mode. If you have XFree 4.x, this is done automatically, but with XFree 3.x you have to do it yourself. Once your MTRR registers are properly configured you should see something like this :
{{{
# cat /proc/mtrr
ShowText
of this page
EditText
of this page
FindPage
by browsing, searching, or an index
Or try one of these actions:
LikePages,
SpellCheck
MoinMoin 1.108, Copyright © 2000-2001 by Jürgen Hermann
config = 0.000
total = 0.150
imports = 0.090
