| Experimenter's Tests Feedback |
|
||||||||
| Subject: Success From: mcpherbn@mail.austasia.net (Neil McPherson) |
||||||||
Dear Jean-Louis, I Have replicated
your EHD flying saucer v1.O,and the Tri-Arcuate ship simulation
with moderate success .Also I have replicated the EHD-Engine v1.0
with outstanding results .I replaced your copper ring annular
electrode with strips of magnesium with some improvement I
believe' !!!.
AT The moment I am fooling around with accelerating and
decelerating rotating fields .
Will let you know how it goes.....
Thanks for your information and inspiration ,
From the land down under,
Neil McPherson
The EHD engine is a 12cm diameter cone made from 2 layers of aluminium foil and positively charged to 28kv. The annualar or earthed electrode is a 3mm wide magnesium strip connected to the cone by cardboard.The 28kv power sorce is from an old computer monitor.The engine speed is approx .4m metres per second. |
These are all replica's of JL Naudin's devices execpt on the EHD craft, I use a magnesium strip instead of copper wire. For detailed specifications see JLN labs website. Be careful when using these electrical devices. I will keep in touch, All the best Neil
McPherson. |
Return to the Advanced propulsion home page
